|
|
- Compression and Tension Applications
|
 |
The Model C-800
is arranged for installation in a horizontal plane in either compression or tension. A base plate is provided for bolting to the customer-furnished foundation when used in the compression mode or two holdback brackets are located at the rear of the machine for connection to the customer-furnished bridle or anchor structure in the tension mode.
|
|
|
The Model C-800 Continuous Acting Linear Winch and Hydraulic Powerplant
as described on this page will provide the following performance data: |
|
|
|
SPEED RANGE: |
800,000 lbs @ 10 feet per minute |
(363 Metric Tons @ 3 Meters per minute) |
|
|
|
LOAD LOWERING: |
302,000 pounds @ 10 feet per minute |
(137 Metric tons max.@ 3 meters per minute) |
|
|
|
Length |
300.75 inches (7639 mm) |
Width |
84.12 inches (2137 mm) |
Height |
49 inches (1246 mm) |
Weight |
57,100 lbs (25,900 kgs) |
|
|
|
|
- 500 Horsepower Cummins Diesel Powered Hydraulic Powerplant with Linear Winch Control System.
|
|
|
|
- Interconnecting Hydraulic Hoses with plated fittings and electrical wiring to interconnect the system component.
|
|
|
|
|
- Hydraulic driven spooling reel for 4 inch (102mm) wire rope size. The spooling reel will spool 2500 ft. (762 meters) of 4" wire (102 mm).
|
|
|
|
- Control Console to be located on the hydraulic power unit.
|
|
|
|
